DVB-T/T2 Advanced Monitoring Receiver
DB2004-T/T2 is an advanced monitoring probe, fully compliant with DVB-T/T2 standards. With its powerful, DSP Based high-end digital tuner, it allows for accurate and dependable monitoring with detailed DVB-T/T2 component information and PID alarms. In addition to advanced decoding and monitoring of the MPEG transport stream, this tool also supports TR 101 290 monitoring, priority 1, 2 and 3. It provides a selectable wide range IF filter bandwidth, Channel Impulse Response display, as well as a spectrum analyzer allowing checks of the RF carrier. It also lets users choose between a predefined DVB channels scan or manual tune. Affordable and easy to use, this is the ultimate DVB solution.
- DVB-T/T2 Compliant Receiver
- High-end Digital Tuner, UHF 21-60 Channel
- Up to 110 dBµV direct RF Antenna Input
- Advanced MPEG Monitoring and PID Alarms
- Detailed DVB-T/T2 component information
- TR 101 290 Monitoring, Priority 1, 2 and 3
- Predefined DVB channels scan or manual tune
- RF Spectrum & Constellation display
- PLP extraction and TS PLP analysis
- Built-in easy to use WEB and FTP server
- Antenna port with built-in RF attenuator
- Selectable wide range IF filter bandwidth
- Very Intuitive Navigational Menu
- Levels measurement with data history
- Spectrum analyzer allowing checking of the RF Carrier
- Service Availability Error & Service Degradation Error
- Adjustable MIN/MAX alarms for RF, SNR, BER, MER
- Alarm dispatch via E-mail, SNMP ver.2C and GPO
- Professional ASI Input and Output
- LAN port for full TCP/IP remote control and monitoring
- Protected access to the device settings
- SNTP for automatic synchronization of the built-in clock
- LAN port for full TCP/IP remote control and monitoring
- Apple and Android devices support
- Firmware updates will ensure improved operation
- Easy Installation and Setup
Drawing on years of experience and always aiming to expand our product line and to make innovative technology available to all, DEVA introduces a revolutionary tool – the DB2004-T/T2. This is an advanced monitoring probe of the highest quality, fully compliant with DVB-T/T2 standards. With its powerful, DSP based high-end digital tuner, it allows for accurate and dependable monitoring with detailed DVB-T/T2 component information and PID alarms. In addition to advanced encoding and monitoring of the MPEG transport stream, this tool also supports TR 101 290 monitoring, priority 1, 2 and 3. The intuitive navigational menu and the built-in WEB and FTP server make this product extremely user-friendly and easy to install and set up. The DB2004-T/T2 provides a selectable wide range IF filter bandwidth, as well as a spectrum analyzer allowing checks of the RF carrier. It also lets users choose between a predefined DVB channels scan or manual tune.This product offers PLP extraction and TS PLP analysis and adjustable MIN/MAX alarms for RF, SNR, BER and MER. Alarm dispatch can be achieved via email, SNMP ver. 2C or GPO.
Other notable features are the RF Spectrum and Constellation display, the professional ASI input and output and the antenna port with a scalable built-in RF attenuator. The DB2004-T/T2 provides protected access to the device settings and allows for firmware updates, guaranteeing its improved operation. The product also supports both Apple and Android devices.
This advanced remote control and monitoring tool is the ultimate DVB solution, providing accuracy and versatility at an affordable price.
| RF Input | |
| Tuning Range | Frequency Agile 474-786 MHz; UHF 21-60 Channel |
| Tuning Step | 10kHz |
| Tuner Sensitivity | 30 dBμV |
| Antenna Port | N Connector, Female, 50Ω |
| Internal Attenuator | 0, 10, 20 and 30 dB |
| RF input level | up to 120 dBμV |
| Supported Standards | DVB-T – ETSI EN 300 744; DVB-T2 & T2 Lite – ETSI EN 302 755 v1.3.1, ETSI TS 102 831; T2-MI – ETSI TS 102 773 |
| ASI Input | |
| Standard | ASI–C MPEG–2 ISO/IEC 13818–1 |
| Input connector | BNC 75 ohm, Female, ASI-C |
| Input mode | DVB-ASI 188 byte packets |
| ASI Output | |
| Standard | ASI–C MPEG–2 ISO/IEC 13818–1 |
| Output mode | 188 bytes packet |
| Output connector | BNC 75 ohm, Female, ASI-C |
| Monitoring Features | |
| RF input level | 30-110 dBμV ±1 dB |
| MER | 0 to 40 dB (±1 dB) |
| SNR | 0 to 40 dB (±1 dB) |
| BER Before-Viterbi(DVB-T) | 1x10-2 to 1x10-5 |
| BER Post-Viterbi(DVB-T) | 1x10-2 to 1x10-8 |
| BER (DVB-T2) | Before/Post-LDPC, Post-BCH |
| Signal Lock | Lock/Unlock |
| Modulation parameters | L1 signaling in DVB-T2, TPS in DVB-T |
| SFN Monitor | Channel Impulse Response (CIR); Echoes Delay and Power Level alarms |
| ETSI TR 101 290 Monitor | ETSI TR 101 290 Priority 1, 2 and 3; MPEG-2 TS Monitor, TS (with MIP packet) Network Delay |
| T2-MI Monitor | Single/Multi-PLP support; ETSI TR 101 290 T2-MI packet, L1 pre/post signaling; T2-MI Network Delay; PLP extraction and TS PLP analysis (ETR 101 290) |
| QoS | SAE (Service Availability Error), SDE (Service Degradation Error) |
| Round-Robin Logger | Monitor sequentially multiple channel frequencies or PLPs |
| RF Spectrum Display | RF Spectrum with SPAN 10 MHz |
| Constellation Display | QPSK, 16QAM, 64QAM, 256QAM |
| Other Features | Audio/Video Freeze Detection, DOCSIS Monitoring |
| Communication Interfaces | |
| Type | RJ45 Connector, Ethernet 10/100 Base-T |
| Supported Protocols | HTTP, FTP, SMTP, SNMP v2/v2C |
| Device Discovery | UPnP support |
| Measurement Storage | |
| Storage | 32GB Build-in Memory Card |
| Monitoring Logs Data format | Text, CSV |
| Operating conditions | |
| Temperature | 10°C - 45°C |
| Humidity | < 75%, non-condensing |
| Power | |
| Voltage | 100-240V / 50-60 Hz |
| Power Consumption | 20VA |
| Connector | IEC320, Fused and EMI-suppressed |
| Size and Weight | |
| Dimensions (W;H;D) | 485 x 44 x 180 mm |
| Shipping Weight | 540 x 115 x 300 mm / 2.700 kg |
| HS Code | 8527212000 |
-
Brochure
-
Images
